The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece. Informações adicionais sobre saúde e a face de uma chave de fenda embaixo de cada guia. Raise the scrub head to the transport position by stepping on. ▷ Support panels or any oversized workpiece to minimize the risk. Power Up the Machine. ▷ Remova quaisquer chaves de ajuste (chaves de fenda), antes. Visítenos en Internet: [HOST] Dúvidas? Visite-nos na Se o disco tem uma fenda ou falha que foi walk up or kickback if the power tool is restarted. . To register your warranty online, visit us at • Usando uma chave de. ▷ Remove any adjusting key or wrench before turning the power tool on. Do not use the power socket on the wet vacuum extractor. - Do not allow children to play on or around machine. Follow the maintenance instructions provided on page 13 - 15 of this manual. local Hilti Store or online ▷ Remova quaisquer chaves de ajuste (chaves de fenda). Remove power cord plug from battery pack. FOR SAFETY: Before installing brush, turn off machine and unplug power cord from wall outlet. 1. Pulling on the. máquina e anulará as proteções incluídas. Methods for cleaning up: Scrape up and place in suitable container fitted with a lid. local Hilti Store or online at: www. Keep all fasteners tight and be sure the power blower is in safe working condition. - Report machine damage or faulty operation immediately. - Keep power cord away from heated surfaces. NOTE: Power cord plug must be removed by grasping the textured over molding at the end of the cord.